Texas Gun Trader
NEW - Ruger AR-556 Sporting Rifle SA 5.56 Listing ID: 2929380
Description
Never Fired
* StockBlack Synthetic, Collapsible
* Front SightAdjustable Post
* Rear SightAdjustable Ruger® Rapid Deploy
* Barrel Length16.10”
* Thread Pattern1/2”-28
* FeatureStandard
* HandguardGlass-Filled Nylon
* Twist1:8” RH
* Capacity30
* Receiver FinishType III Hard-Coat Anodized
* Height8”
* Weight6.5 lb.
* Overall Length 32.25” - 35.50”
* Length of Pull 10.25” - 13.50”
* Grooves5
* UPC7-36676-08500-2
* Ruger® Rapid Deploy folding rear sight provides windage adjustability and pairs with the A2-style, F-height, elevation-adjustable front sight for a solid, reliable aiming system.
* Made from 7075-T6 hard-coat anodized aluminum forgings, shot-peened and proof-tested 9310 steel bolt, and 8620 steel bolt carrier. The inside diameter of the carrier and gas key are chrome plated and the key is staked for longevity.
* Barrel nut and delta ring allow easy, one-person service of the heat-resistant glass-filled nylon handguard. The design accepts most standard carbine-length handguards. The barrel nut uses a standard wrench.
* Gas block is located at a carbine-length (M4) position for improved balance and handling. Multiple attachment points include a QD socket and bayonet lug, for many sling and accessory mounting options. Serrations on the angled face of the gas block provide a low-glare surface.
* Handguards are made from heat-resistant glass-filled nylon for shooting comfort and durability.
* Single-stage trigger provides durable and reliable fire control. The enlarged trigger guard is designed to allow gloved shooting in cold weather.
* Six-position, telescoping, M4-style buttstock and Mil-Spec buffer tube allow the rifle to be properly sized for different shooters or varying levels of outerwear.
* Equipped with a medium contour, cold hammer-forged alloy barrel with 1:8” twist rifling that provides exceptional accuracy with bullets from 35 to 77 grains. M4 feed ramps and 5.56 NATO chamber allows the use of both 5.56 NATO and .223 Rem. ammunition. The barrel and 1/2”-28 Ruger® flash suppressor have a matte black oxide finish to reduce glare and provide corrosion resistance.
* Front sight post is elevation adjustable, and a front sight tool is included. The A2-style, F-height front sight allows co-witness with many optics.
* Ergonomic pistol grip features an extended trigger reach for more precise trigger control.
* Made from aerospace-grade 7075-T6 aluminum forging, the flat top upper receiver features a forward assist, dust cover and brass deflector.
VTAC WIDE PADDED SLING
The Viking Tactics Wide (Padded) Quick Adjust Upgrade sling comes with two new great features. We have added a textured rubber pull tab, which allows the user to quickly adjust the sling.
The function of the Wide Padded Upgrade sling remains the same as our most popular slings. For those that asked we have answered with metal hardware all around and elastic stowage bands to keep excess sling covered. The elastic bands will also help with noise disciple when used with the metal hardware.
Resin treated nylon 1″ ends have metal hardware and elastic stow bands to allow easy mounting and adjustment with increased strength and durability.
Made in the USA!
VTAC HEAVY DUTY QUICK DETACH SWIVEL
The VTAC Heavy Duty Quick Detach Swivel has a flush push button for use with VTAC Slings.
The HDQD (Heavy Duty Quick Detach) sling swivel is built for rugged use while giving you the ease of push button quick connect and disconnect. The VTAC HDQD is designed with a flush mounted push button, keeping the sling attached and only disconnected when intended. The flush cup is an upgrade from many on the market and will quickly become your go to sling mounting choice. The HDQD will fit industry standard cups.
The VTAC HDQD works exceptionally well when paired with the VTAC LPSM (Low Profile Sling Mount), VTAC RSM (Railless Sling Mount), or VTAC LUSA (Universal Sling Attachment). The HDQD can be twisted and locked into position when used with VTAC Sling Attachments.
Inside diameter 1 1/4″
LUTH-AR MBA Buttstocks
The MBA Buttstock Family is the original Modular Buttstock Assembly designed for the AR-15 platform. The MBA allows you to setup your butt stock in the best possible configuration for you. The MBA-1 and MBA-2 are fixed “rifle” butt stocks while the MBA-3, MBA-4 and MBA-5 are adjustable “carbine” butt stocks. The rifle butt stocks use an A2 style buffer tube, and the carbine butt stocks use a 5 or 6 position buffer tube.
Note: Old Buttstock is provided. Gun Case goes with AR and four extra mags.
* StockBlack Synthetic, Collapsible
* Front SightAdjustable Post
* Rear SightAdjustable Ruger® Rapid Deploy
* Barrel Length16.10”
* Thread Pattern1/2”-28
* FeatureStandard
* HandguardGlass-Filled Nylon
* Twist1:8” RH
* Capacity30
* Receiver FinishType III Hard-Coat Anodized
* Height8”
* Weight6.5 lb.
* Overall Length 32.25” - 35.50”
* Length of Pull 10.25” - 13.50”
* Grooves5
* UPC7-36676-08500-2
* Ruger® Rapid Deploy folding rear sight provides windage adjustability and pairs with the A2-style, F-height, elevation-adjustable front sight for a solid, reliable aiming system.
* Made from 7075-T6 hard-coat anodized aluminum forgings, shot-peened and proof-tested 9310 steel bolt, and 8620 steel bolt carrier. The inside diameter of the carrier and gas key are chrome plated and the key is staked for longevity.
* Barrel nut and delta ring allow easy, one-person service of the heat-resistant glass-filled nylon handguard. The design accepts most standard carbine-length handguards. The barrel nut uses a standard wrench.
* Gas block is located at a carbine-length (M4) position for improved balance and handling. Multiple attachment points include a QD socket and bayonet lug, for many sling and accessory mounting options. Serrations on the angled face of the gas block provide a low-glare surface.
* Handguards are made from heat-resistant glass-filled nylon for shooting comfort and durability.
* Single-stage trigger provides durable and reliable fire control. The enlarged trigger guard is designed to allow gloved shooting in cold weather.
* Six-position, telescoping, M4-style buttstock and Mil-Spec buffer tube allow the rifle to be properly sized for different shooters or varying levels of outerwear.
* Equipped with a medium contour, cold hammer-forged alloy barrel with 1:8” twist rifling that provides exceptional accuracy with bullets from 35 to 77 grains. M4 feed ramps and 5.56 NATO chamber allows the use of both 5.56 NATO and .223 Rem. ammunition. The barrel and 1/2”-28 Ruger® flash suppressor have a matte black oxide finish to reduce glare and provide corrosion resistance.
* Front sight post is elevation adjustable, and a front sight tool is included. The A2-style, F-height front sight allows co-witness with many optics.
* Ergonomic pistol grip features an extended trigger reach for more precise trigger control.
* Made from aerospace-grade 7075-T6 aluminum forging, the flat top upper receiver features a forward assist, dust cover and brass deflector.
VTAC WIDE PADDED SLING
The Viking Tactics Wide (Padded) Quick Adjust Upgrade sling comes with two new great features. We have added a textured rubber pull tab, which allows the user to quickly adjust the sling.
The function of the Wide Padded Upgrade sling remains the same as our most popular slings. For those that asked we have answered with metal hardware all around and elastic stowage bands to keep excess sling covered. The elastic bands will also help with noise disciple when used with the metal hardware.
Resin treated nylon 1″ ends have metal hardware and elastic stow bands to allow easy mounting and adjustment with increased strength and durability.
Made in the USA!
VTAC HEAVY DUTY QUICK DETACH SWIVEL
The VTAC Heavy Duty Quick Detach Swivel has a flush push button for use with VTAC Slings.
The HDQD (Heavy Duty Quick Detach) sling swivel is built for rugged use while giving you the ease of push button quick connect and disconnect. The VTAC HDQD is designed with a flush mounted push button, keeping the sling attached and only disconnected when intended. The flush cup is an upgrade from many on the market and will quickly become your go to sling mounting choice. The HDQD will fit industry standard cups.
The VTAC HDQD works exceptionally well when paired with the VTAC LPSM (Low Profile Sling Mount), VTAC RSM (Railless Sling Mount), or VTAC LUSA (Universal Sling Attachment). The HDQD can be twisted and locked into position when used with VTAC Sling Attachments.
Inside diameter 1 1/4″
LUTH-AR MBA Buttstocks
The MBA Buttstock Family is the original Modular Buttstock Assembly designed for the AR-15 platform. The MBA allows you to setup your butt stock in the best possible configuration for you. The MBA-1 and MBA-2 are fixed “rifle” butt stocks while the MBA-3, MBA-4 and MBA-5 are adjustable “carbine” butt stocks. The rifle butt stocks use an A2 style buffer tube, and the carbine butt stocks use a 5 or 6 position buffer tube.
Note: Old Buttstock is provided. Gun Case goes with AR and four extra mags.
- Caliber
- Manufacturer
- 5.56 NATO
- Ruger
- Individual